Commercial Electrical Services for Multi-Site Rollouts

Licensed electricians install the circuits, panels, and power your new equipment needs, at every location in your rollout.
Request My Discovery Meeting

What Are Commercial Electrical Services for Multi-Site Rollouts?

Commercial electrical services for a multi-site rollout are the licensed electrical work that has to happen before new technology can be switched on: dedicated circuits, outlet and floor drops, panel and breaker changes, conduit, lighting, and exterior or backup power, completed to the same scope at every location. You provide the electrical plans and hardware specs. TechLink provides the licensed electricians and the project management to execute them across dozens or hundreds of sites.

Power is usually the part of a rollout nobody budgets time for, and the part that decides whether install day happens. Most rollout equipment (signage, kiosks, network racks) runs for 3 hours or more at a stretch, which the electrical code treats as a continuous load. The breaker has to be sized for 125% of that load, so a standard 20-amp circuit can only carry 16 amps of it. That’s where a lot of “just plug it into the existing outlet” plans fall apart. See how electrical work fits the rest of your program on the services overview.

  • Every site includes:
  • Site survey and panel capacity review
  • An electrician licensed for that jurisdiction
  • Code-compliant circuits, conduit, and terminations
  • Circuit testing and panel labeling
  • Closeout photos and notes in SIMPL
Commercial electrical installation with new dedicated circuits and conduit

How Does a Multi-Site Electrical Rollout Work?

1. Scope and Site Survey

TechLink reviews your plans and equipment specs, then surveys each site to confirm panel capacity, breaker space, and pathways before anyone schedules install day.

2. Licensed Electrician by Jurisdiction

Each site is assigned an electrician licensed where the work happens, whether that license comes from the state, the county, or the city.

3. Install to One Standard

Circuits, drops, conduit, and terminations follow the same approved scope at site 1 and site 300.

4. Test, Label, and Document

Circuits are tested and labeled at the panel, and closeout photos are logged to SIMPL for every site.

What Types of Commercial Electrical Work Does TechLink Install?

Electrician testing a new dedicated power circuit for commercial equipment

Dedicated Power Circuits

New dedicated circuits sized for equipment that runs all day: digital signage, kiosks and ATMs, POS systems, network and IT racks, and kitchen equipment.

Electrician installing a new outlet and power drop for commercial equipment

Outlet & Power Drops

New or relocated wall outlets, floor drops for kiosks and display areas, ceiling drops for signage, and GFCI outlets for kitchens and outdoor areas.

Electrician installing LED ceiling lighting during a commercial retrofit

Lighting & Retrofits

LED upgrades, lighting controls and occupancy sensors, parking lot and signage lighting, and emergency and exit fixtures. Recurring code testing lives on our exit and emergency lighting testing page.

Licensed electrician reviewing a commercial electrical panel before adding breakers

Panel Work & Breaker Additions

New breakers, sub-panels, and load reviews for when an existing panel is out of space, out of capacity, or both.

Commercial EV charger powered at a retail parking lot

Exterior Power

Power for drive-thru digital menu boards, outdoor kiosks, parking lot lighting, and commercial EV charger circuits.

Electrician running conduit and raceway in a commercial building ceiling

Conduit & Raceways

EMT and PVC conduit, surface raceway, and in-wall or overhead runs that keep line-voltage wiring code-compliant and out of sight in customer-facing spaces. Data and signal runs are covered under low voltage installation.

Emergency shut-off switch installed on commercial equipment

Equipment Disconnects & Safety Power

Equipment disconnect switches, dedicated kill switches for machinery, and emergency shut-off systems, so equipment can be de-energized safely for service or in an emergency.

Commercial backup generator installed for a business location

UPS, Backup & Generator Power

Generator tie-ins, UPS circuits, and battery-backed emergency systems that keep POS, network, and critical equipment running when the utility goes down.

Why Multi-Location Operators Choose TechLink for Electrical Work

300+ Licensed Electricians, One Project Team

Electrical licenses are issued state by state, and in Illinois, Missouri, New York, and Pennsylvania there’s no statewide license at all, so it’s handled city by city or county by county. TechLink’s network of 300+ licensed electricians, backed by 4,000+ field technicians, puts a properly licensed electrician at each address without you managing 40 local contractors.

One Scope, Many Code Editions

States enforce different editions of the National Electrical Code, and a few leave adoption to each city or county. TechLink holds one scope of work across your portfolio and adjusts only where a local code requires it, so a site in Tennessee and a site in Texas still end up with the same result.

Power and Equipment on the Same Project

The electrician running the circuit and the technician mounting the display report to the same project manager. No handoff between two vendors, and fewer return trips because the power wasn’t ready.

Digital menu board installed with new dedicated power for a national QSR rollout

Case Study: Digital Menu Boards for a National QSR Chain

When a national quick-serve chain replaced static menu boards with digital ones, TechLink ran the new electrical circuits, hardwired the board power, and installed outlets alongside the displays under one project team. Read the Case Study →

Scoping an Electrical Rollout?

Send the site list and the equipment spec. We’ll come back with a scope, a rate card, and the questions your plans haven’t answered yet.

Get a Rollout Estimate

How Do You Track Electrical Work Across Hundreds of Sites?

SIMPL platform dashboard showing electrical work order tracking

Every electrical work order runs through SIMPL, TechLink’s project portal, so you can see which sites have power ready before the hardware ships:

  • RWork order management by site
  • RReal-time project tracking
  • RLive technician status updates
  • RCentralized document and photo storage
  • RReporting and analytics for procurement sign-off
  • RMulti-site coordination
  • RIntegrated billing and invoicing

Who Uses Multi-Site Commercial Electrical Services?

Operations, facilities, and IT teams rolling out equipment that needs new power at every location:

  • Retail chains
  • Quick-serve and full-service restaurants
  • Healthcare and pharmacy
  • Banks and credit unions
  • Corporate offices
  • Industrial and distribution facilities
  • Technology providers and integrators installing for their own customers

Frequently Asked Questions About Commercial Electrical Services

K
L
Does TechLink use licensed electricians in every state?
Yes. Electrical work is performed by electricians licensed for the jurisdiction where each site is located, drawn from TechLink's network of 300+ licensed electricians across the U.S. and Canada. Where a city or county issues its own license, the assigned electrician holds that local license.
K
L
How big does a dedicated circuit need to be for digital signage or kiosks?
If the equipment runs for 3 hours or more at a time, the electrical code treats it as a continuous load, and the breaker must be rated for at least 125% of it. In practice, a 20-amp circuit can carry 16 amps of continuous load. TechLink checks that math against your equipment specs during the site survey.
K
L
Do we need to provide our own electrical plans?
Yes. You provide the electrical plans and hardware specifications, and TechLink provides the licensed electricians and project management to install them. If a survey finds a panel without the space or capacity the plan assumes, it's flagged before install day so the plan can be adjusted.
K
L
Can TechLink run the power and install the equipment on the same project?
Yes. Electricians and installation technicians work under one TechLink project team, so there's no handoff between vendors. On a national QSR digital menu board rollout, that meant new circuits, hardwired board power, and outlets installed alongside the displays.
K
L
What does a multi-site electrical rollout usually include?
Most include new dedicated circuits, outlet or floor drops, breaker or sub-panel work, and conduit, plus exterior power for drive-thru boards, EV chargers, or site lighting where needed. The scope is set once and applied to every location.
K
L
How do we get a quote for a nationwide electrical rollout?
Share your site list, electrical plans, and equipment specs using the form on this page. TechLink's team reviews the scope with you and returns a rate card built around your locations and timeline.

Ready to Power Your Next Rollout?

Tell us how many sites, what’s being installed, and when it needs to be live. We’ll build the electrical scope around it.

Browse all of TechLink’s installation services.

Skip to content